Program Dial; Registering Destinations In The Program Dial - Konica Minolta bizhub 306 User Manual

7.2 Store Address
7.2.8

Registering destinations in the program dial

Register a destination number and transmission-receiving function in a One-Touch Dial Key; you can only
press the One-Touch Dial Key to execute the function.
<Transmission and receiving functions that can be registered>
-
Sequential broadcast transmission
- Specified-time transmission
- Confidential TX
- Polling RX
- Relay instruction transmission
1
Press the Utility key.
2
Use the +/, key to select [DIAL REGISTRATION], then press the OK key.
3
Use the +/, key to select [PROGRAM DIAL], then press the OK key.
4
Press a target key among One-Touch Dial Key 29 to 32.
% One-touch dial keys 29 to 32 are available when the Switching Plate is opened upward.
5
Use the +/, key to select a target function, then press the OK key.
6
Follow the setting procedure for each function.
% Sequential broadcast transmission (p. 3-15)
% Specified-time transmission (p. 3-25)
% Confidential transmission (p. 4-6)
% Relay instruction transmission (p. 4-12)
% Polling RX (p. 4-11)
Settings are registered.
7
Use the +/, key to select [RETURN], then press the OK key.
This registers settings, and returns to the Store Address screen.
bizhub 306/266
7
7-13