Konica Minolta bizhub 181 User Manual page 183

5
5
Using the keypad, type in the fax number of the recipient.
– A maximum of 30 digits can be entered for the fax number.
– For details on entering text, refer to "Entering text" on page 1-12.
– If settings are not to be specified for F-code transmission or the
communication speed, press the [OK] key. The settings are regis-
tered, continue with step 8.
– To specify settings for F-code transmission or the communication
speed, press the [,], and then continue with the next step.
– For details on F-codes (SUB address and password), refer to "Us-
ing F-codes" on page 3-2.
– If an e-mail address is entered for the destination and the [,] key is
pressed, the BASIC/ADVANCED settings can be specified. For de-
tails on the BASIC/ADVANCED settings, refer to "Selecting BASIC/
ADVANCED settings" on page 4-7.
6
Press the [+] or [,] key until the parameter to be set is selected, and
then press the [OK] key.
5-26
Utility mode/Fax mode parameters
Fax kit FK-506