Output Mode For Machine With Inner Tray It-101 - Konica Minolta 7020 Instruction Manual

Output Mode for Machine with Inner Tray IT-101

This section describes the following four output modes for a copier with the Inner
tray.
The Stack mode is initially selected.
The Inner Tray IT-101 is equipped with two exit trays.
❒ Incompatible with Group mode: Proof Copy, Sheet/Cover insertion, Booklet, OHP, Im-
age insert, Repeat, AUTO layout, Non-image area erase, Stamp (Numbering)
❒ Incompatible with E-SORT group mode: Using platen glass (unless Chapter with Platen
store mode, Flip Side 2, Image shift, or Stamp excluding Numbering is used), Proof
copy, Sheet/Cover insertion, Booklet, OHP, Image insert, Special original (Mixed origi-
nal), Repeat, AUTO layout, Non-image area erase, Stamp (Numbering)
❒ Incompatible with E-SORT+sort mode: Sheet/Cover insertion, Booklet, OHP, Special
original (Mixed original), Repeat, AUTO layout, Non-image area erase
Stack
Each exit tray provides 4 types of output mode as described below.
q Stack mode copies the original set in amounts determined by the print quantity
setting, then outputs sorted sets normally.
w E-SORT+sort mode rotates every other sorted sets by 90° upon exit, provided
the same paper size is loaded in two trays, one tray with paper loaded in portrait
orientation and the other tray with paper loaded in landscape orientation, e.g., A4
and A4R.
e Group mode copies each original page in amounts determined by the print quantity
setting, then outputs grouped sets normally.
r E-SORT+group mode rotates every other grouped set by 90° upon exit, pro-
vided the same paper size is loaded in two trays, one tray with paper loaded in
portrait orientation and the other tray with paper loaded in landscape orientation,
e.g., A4 and A4R.
3-32
3
2
1
Originals
E-SORT+sort
Example: 3 copied sets
Group E-SORT+group