Output Mode For Machine With Finisher Fs-107 - Konica Minolta 7020 Instruction Manual

Output Mode for Machine with Finisher FS-107 (continued)
1
Press
OUTPUT
2
Select the desired exit tray.
Touch to highlight the desired exit tray key in the
EXIT area.
3
Select the desired output mode.
Touch to highlight the desired output mode key in
the OUTPUT MODE area.
To select Stack mode, deselect all the keys.
When selecting Staple mode, select the staple
position as follows.
When selecting any other mode, proceed to step
7 .
4
Touch
STAPLE SET
3-30
on the control panel.
.
Please Be Reminded! Please Be Reminded!
When starting a new copying
job, be sure to close the RADF
securely, then press
AUTO RESET
HINTS
Key operator can change the
initial output mode from Sort
to Staple, Stack, or Group.
See p. 12-10.
.