Weekly Timer; Weekly Timer Setting; Weekly Timer Copier On/Off Time Set; Machine Working Day Individual Set - Konica Minolta 7020 Instruction Manual

Hide thumbs Also See for 7020:
Table of Contents

Advertisement

[9] Weekly Timer

The Weekly Timer is a copier management function that shuts down power to the
machine on a daily or hourly basis. The timer can be programmed specifically for
lunch breaks, weekends and holidays, or any time the copier is not required.
A unique 4-digit Weekly timer master key code is normally set by service installation.
If the unique code is not set by service, the copier will not display the Weekly Timer
Master Key Code Screen when the Weekly Timer mode is being accessed, and a
Weekly timer master key code will not be required.
To ensure the security of Weekly Timer mode, it is recommended that you establish
a unique Weekly timer master key code.
In Addition, Timer Interrupt can be enabled (with or without a password requirement)
to allow temporary use of the machine during periods when power is shut down by
the Timer function.
Conditions required to use the Weekly Timer:
• The power plug is inserted into the socket.
• The main power switch and power switch are turned on.
• The current date and time are correctly set.
If the Weekly timer needs to be activated on your machine, contact your service
centre.
The following Weekly timer settings can be made.

1. Weekly Timer Setting

Enable and disable the Timer function.

2. Weekly Timer Copier ON/OFF Time Set

Specify the times that the copier will turn ON and OFF for each day of the week or
the entire week.

3. Machine Working Day Individual Set

Specify the working days of the machine by the Timer, for all Mondays through Sun-
days, and/or individually for each day of the given month.

4. Lunch Hour Off Function

Specify the lunch time interval during which the copier will go off and on.

5. Password Setting

Require Password entry for the Timer off function and establish the amount of usage
time.
NOTES:
• The time is set in terms of the 24 hour clock, where hour [1] is the first hour after midnight; and
hour [24] is the hour of midnight. For example, 6 a.m. is 06:00 hours; 6 p.m. is 18:00 hours.
• The [AUTO RESET] key is used to change numbers determined by the SET touch key.
12-26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

702570307035

Table of Contents