Positioning Originals In Radf; Density - Konica Minolta 7020 Instruction Manual

Positioning Originals (continued)
Positioning originals in Mixed original mode
Mixed size originals can be copied together from the
document feeder.
To use the Mixed original mode, see procedure on p. 8-
23 to p. 8-24.
1
Arrange originals in order.
Arrange the mixed size originals as illustrated be-
low.
2
Position mixed originals FACE UP,
aligned with the left rear side of the
document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 50 originals can be set at a time.
3
Adjust paper guides.
To the left
To the
depth
Setting
direction
Please Be Reminded! Please Be Reminded!
• Before placing originals in
the tray, be sure the docu-
ment feeder is closed fully.
• Be sure not to use unsuit-
able RADF originals. See p.
9-5 for details.
HINTS
See p. 9-6 for available com-
binations of mixed originals.
3
Copying
Operations
Positioning
Originals
Setting
Print Quantity
Paper Size
Lens Mode

Density

1s2, 2s2
2s1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-3