Konica Minolta 7020 Instruction Manual page 22

Requirements for Safe Use (continued)
CAUTION: RECOMMENDATION OF PERIODIC CHECK
Be sure to check periodically the following points:
(1) The main lead or the power plug does not generate abnormal heat.
(2) The power plug is not inserted loosely or the lead is not cut or scratched.
(3) The earth wire is correctly connected.
(4) The power plug or the power outlet is not covered with dust.
If you find anything abnormal in the above items, stop using the machine and contact
your service centre.
CAUTION: TONER
• Keep the toner cartridge away from children. The toner is nontoxic; however if you
inhale or contact with eyes by accident, flush with water and seek medical advice.
• Do not throw the empty toner cartridge into a fire. If it is thrown into a fire the toner
may ignite and cause a dangerous situation.
CAUTION: PAPER
Check paper to be sure it is according to specifications outlined in Section 9.
CAUTION: POWER SAVER AND WEEKLY TIMER
• During Power Saver mode the copier is still connected to the mains power supply
and power is still applied to certain areas of the machine. To avoid any unexpected
troubles turn the power OFF when not using the copier for long periods of time.
• When the Weekly Timer function is operating, turning power OFF will disable the
function.
CAUTION: FIXING UNIT
The Fixing unit is internally very hot. To avoid getting burned, DO NOT TOUCH. Be
careful when withdrawing the fixing unit.
WARNING: DRUM UNIT
The drum unit has a high voltage generated.
To avoid an electrical shock, DO NOT TOUCH.
CAUTION: DISPOSE OF A DISUSED COPYING MACHINE
Do not dispose of this copier yourself. Contact your service centre, who can arrange
for its safe disposal.
If you change the place of installation, please contact your service centre.
CAUTION: PAPER CAPACITY FOR THE EXIT TRAY
The exit tray capacity is max. 100 sheets/ 40 sheets (A3, B4 only). If a copy run of
more than 100/40 is required, be sure to remove the copies from the exit tray before
the maximum capacity is reached. Failure to do so will cause the copier to jam.
1-8