Table of Contents
Advertisement
Output Mode for Machine with Finisher FS-107 (continued)
5
Select the desired staple position.
Touch to highlight the desired staple position key
on the Staple Position Selection Screen.
6
Touch
The Output Mode Screen will be restored.
7
Touch
The Basic Screen will be restored.
8
Select additional copy conditions, as
desired.
9
Enter the desired print quantity from
the control panel keypad.
10
Position original(s).
11
Press
START
CAUTION
When the finisher exit tray capacity is exceeded
due to the print quantity selected, remove the
copied sets as they exit; otherwise, mishandled
paper will occur.
OK
.
OK
.
.
The finisher mode icon (Stack:
None, Sor t:
, Group:
Staple:
) or staple position
icon appears/disappears in
the message area of the
screen to indicate the selected
output mode.
HINTS
See p. 9-3 to be sure that the
finisher capacity is not ex-
ceeded.
HINTS
See p. 3-2 to p. 3-6 for details
on positioning originals.
Press
to suspend the
STOP/CLEAR
scanning or printing job.
3
Copying
Operations
Positioning
Originals
Setting
Print Quantity
Paper Size
Lens Mode
Density
1s2, 2s2
2s1
,
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-31
- Quick Links:
- Main Body Specifications
Hide quick links:
Advertisement
Chapters
Table of Contents
