Copying Onto Ohp Films (Ohp) - Konica Minolta 7020 Instruction Manual

Copying onto OHP Films (OHP)

Use the OHP function in 1s1 or 2s1 mode to copy onto overhead projection trans-
parent films, and output a blank or copied interleaf sheet with each copied transpar-
ent film.
In the Blank sheet interleaving mode, a blank interleaf sheet is output with each
transparent film to keep the film material from sticking together.
In the Copy sheet interleaving mode, a copied interleaf sheet is output with each
transparent film to provide reference during a presentation; a medium for photocopy-
ing; and a set for filing or inserting into a binder.
Specifications for OHP
❒ Transparent film source: Multi-sheet bypass tray
❒ Print quantity: 1
❒ AMS is automatically selected.
❒ Incompatible Conditions: APS, 1s2, 2s2, Sort, Staple, Group, E-SORT+group, E-
SORT+sort, Sheet/Cover Insertion, Chapter, Booklet, Image Insert, Special Original
(Mixed Original), Repeat
Original
1
Insert a sheet of transparent film into
the Multi-sheet bypass tray.
2
When interleaf sheet is needed, load
copy paper in tray 1, 2, 3, or 4 to match
the size of transparent films.
3
Select the Multi-sheet bypass tray on
the Basic Screen.
8-14
Blank sheets
Transparent films
Transparent films
Blank Sheet Interleaving
Copied sheets
Transparent films
Copy Sheet Interleaving
Please Be Reminded! Please Be Reminded!
Do not load transparent films
into any other tray.
Please Be Reminded! Please Be Reminded!
When starting a new copying
job, be sure to close the RADF
securely, then press
OHP
.
AUTO RESET