Positioning Originals - Konica Minolta 7020 Instruction Manual

Positioning Originals

I Positioning Originals in RADF
The document feeder (RADF) automatically feeds up
to 50 originals directly to the platen area, starting with
the top sheet. The RADF should only be used for
unstapled, smooth, flat originals.
Positioning originals in Normal mode
1
Arrange originals in order.
2
Position original(s) FACE UP in the
document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 50 originals can be set at a time.
3
Adjust paper guides.
3-2
Please Be Reminded! Please Be Reminded!
• Before placing originals in
the tray, be sure the docu-
ment feeder is closed fully.
• Be sure not to use unsuit-
able RADF originals. See p.
9-5 for details.
Please Be Reminded! Please Be Reminded!
• Do not set more than 50
originals; otherwise a paper
misfeed will occur.
• If the number of originals ex-
ceeds 50, divide them into
blocks not exceeding 50
sheets, then load them from
the block with the first page.
See p. 3-21.