To Copy In Fixed Magnification Mode (Re) - Konica Minolta 7020 Instruction Manual

Selecting Magnification Ratio (Lens Mode) (continued)
I To Copy in Fixed Magnification Mode (RE)
Use the 6 preset ratios (0.71, 0.82, 0.86, 1.15, 1.22,
1.41) and 3 userset ratios to increase or decrease mag-
nification in fixed amounts.
Specification for Fixed Magnification Mode
❒ Incompatible Conditions: AMS, Repeat mode in
Repeat, Reduce & Shift in Image Shift
1
RE
Touch
The popup menu for selecting the desired preset/
userset ratio will be displayed.
2
Select the desired magnification.
3
Select additional copy conditions, as
desired.
4
Enter the desired print quantity from
the control panel keypad.
5
Position original(s).
6
Press
START
on the Basic Screen.
.
Please Be Reminded! Please Be Reminded!
When starting a new copying
job, be sure to close the RADF
securely, then press
AUTO RESET
Touching any key on the
popup menu will momentarily
highlight that key, then the
popup menu will disappear
automatically.
The selected ratio will be dis-
played on the Basic Screen.
HINTS
Three userset ratios are ad-
justable by the key operator.
See p. 12-14.
HINTS
See p. 3-7 for details on set-
ting print quantity.
HINTS
See p. 3-2 to p. 3-6 for details
on positioning originals.
3
Copying
Operations
Positioning
Originals
Setting
Print Quantity
.
Paper Size
Lens Mode
Density
1s2, 2s2
2s1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-13