Tray - Konica Minolta 7020 Instruction Manual

[2] Copier Initial (continued)
Procedure
1 Touch 2. Copier Initial on the Key Operator Mode Screen to display the Copier Initial
Setting Menu Screen.
2 Touch 3. Magnification to display the Magnification Initial Setting Screen. The de-
fault setting is 1.00.
3 Select the desired setting from the Magnification Initial Setting Screen:
To select 1.00 if it is not already displayed, touch 1.00 .
To select another ratio, touch upper/lower arrow key to display the desired ratio, or
enter a 3-digit ratio using the keypad on the control panel.
To select AMS, touch AMS .
4 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
5 Touch RETURN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
I 4. Tray
Set paper tray priority to be in effect after power is turned on or after Auto/Reset
occurs.
This function sets tray priority, not paper size priority. Therefore, if paper size is changed
in the tray, the tray will still remain the priority tray.
The initial paper tray setting should not conflict with the initial setting for Lens Mode.
For example, if the initial paper tray setting is APS, the initial setting for paper tray
priority will be ignored.
❒ Default setting: APS on, no specified tray
NOTE:
6. Non-image Erase key is displayed on the Copier Initial Setting Menu Screen of Konica 7035
only.
Procedure
1 Touch 2. Copier Initial on the Key Operator Mode Screen to display the Copier Initial
Setting Menu Screen.
2 Touch 4. Tray to display the Tray Initial Setting Screen.
3 Touch APS , or touch any tray key to select a specific tray.
4 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
5 Touch RETURN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
EKC
Lock Job
Memory
Paper Type
Panel
Contrast
Key Operator
Data
Weekly Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
12
Key Operator
Mode
12-9