Konica Minolta 7020 Instruction Manual page 136

Inserting Sheets and Covers (Sheet/Cover Insertion) (continued)
10
Position originals FACE UP in the docu-
ment feeder.
11
Press
START
CAUTION
When the finisher exit tray / inner tray / paper
exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they
exit; otherwise, mishandled paper will occur.
8-6
.
Entering Page Numbers
Fifteen keys are displayed on the screen to designate each
insertion location.
The first (upper left) key displays the Front Cover icon if se-
lected. The Back Cover icon appears, if selected, as the last
(lower right) key.
Touch to highlight a blank key, then use the control panel key-
pad to enter the page number of insertion location.
Example: If p. 4 is entered in blank mode, a blank sheet will be
inserted between p. 4 and p. 5; in copy mode, a copied sheet is
inserted at p. 4.
HINTS
• For details on positioning
originals, see p. 3-2.
• Use RADF store mode (p. 3-
21 to p. 3-22) when the origi-
nal count exceeds 50.