Precautions For Routine Handling - Konica Minolta 7020 Instruction Manual

Requirements for Safe Use (continued)
I Precautions for Routine Handling
WARNING: HIGH VOLTAGE
DO NOT TOUCH the high voltage parts indicated with WARNING label or described
in the manual.
CAUTION: ACTIONS IN RESPONSE TO TROUBLES
• If the Service Call screen is displayed and copier operations cannot be continued
any more, stop the operation to prevent any unexpected accident. Write down the
report code as stated on the 2nd line of the message, then switch off the copier
and disconnect from the power socket. Contact your service centre and inform
them of the report code.
• Do not touch the high temperature parts indicated with CAUTION labels or de-
scribed in the manual.
• Do not touch the inside of the machine for any other purpose than removing jammed
paper or adding toner.
• If machine repair is necessary, be sure to contact your service centre. Never at-
tempt to repair it by yourself.
• If any abnormal sound, smell or smoke comes from the machine, immediately stop
using it, turn off the power switch, disconnect the power plug and contact your
service centre.
• If the breaker trips or the fuse blows, turn off the power switch, reset the breaker or
the fuse, and turn on the machine. If the same situation occurs again, contact your
service centre.
• Insure the replacement fuse conforms with the rating of the power source. Never
use a fuse with an incorrect rating.
CAUTION: PREVENTION OF FIRE
Do not use volatile combustibles such as a thinner or alcohol near the machine.
CAUTION: PROHIBITION OF MACHINE MODIFICATION
Do not modify or remove any parts by yourself.
CAUTION: PREVENTION OF MACHINE
TROUBLES
• Do not drop small metallic objects such as paper clips
or staples inside the machine.
• Do not place any heavy or hard objects such as a
vase, books or ornaments on the machine.
1
Safety
Information
1-7