Output Destination; Staple - Xerox ColorQube 8700 Reference Manual

Output Destination

Indicates the output bin where the print job is sent.
Note: Some output options may not be available on every product model
Output Tray
Simple Catch Tray
Offset Catch Tray
Top output tray of finisher
Finisher stacker tray

Staple

This command indicates use and location of staple(s).
PJL COMMENT Command
@PJL COMMENT XRXSTAPLE=string;
Where string is:
PORTRAIT
LANDSCAPE
DUAL
For multiple staples (4) use the command below:
@PJL COMMENT OID_ATT_FINISHING
OID_VAL_FINISHING_STAPLE_MULTIPLE;
CQ8700-8900
Customer Support
PS
<< /OutputType (MiddleTray) >>
setpagedevice
<< /OutputType (TopTray) >>
setpagedevice
<< /OutPutType (Stacker) >>
setpagedevice
PJL Comment Command
@PJL COMMENT
OID_ATT_OUTPUT_BINS
OID_VAL_OUTPUT_BIN_MIDDLE;
@PJL COMMENT
OID_ATT_OUTPUT_BINS
OID_VAL_OUTPUT_BIN_TOP;
@PJL COMMENT
OID_ATT_OUTPUT_BINS
OID_VAL_OUTPUT_BIN_STACKER;
PS
<< /Staple int /StapleDetails << /Type 1 /StapleLocation
(string) >> >> setpagedevice
Where int is:
0 = No Staple
3 = Staple at end of set
Where string is:
SinglePortrait
SingleLandscape
DualLandscape
Multiple
Page 15