Waveform Intensity And Signal Detail - Agilent Technologies InfiniiVision 5000 Series User Manual
Infiniivision 5000/6000/7000 series oscilloscopes
Hide thumbs
Also See for InfiniiVision 5000 Series:
- Programmer's manual (788 pages) ,
- Service manual (126 pages) ,
- Demo manual (10 pages)
Table of Contents
Advertisement
5
Displaying
Waveform Intensity and Signal Detail
180
3 Turn the Horizontal Position (Delay Time) knob (
channel's vertical position knob ( ) to pan vertically.
The stopped display may contain several triggers worth of information, but only the last
trigger acquisition is available for pan and zoom.
The Intensity knob lets you adjust the displayed waveforms to account for various signal
characteristics, such as fast sweep speeds and low trigger rates. Increasing the intensity
lets you see the maximum amount of noise and infrequently occurring events. Reducing
the intensity can expose more detail in complex signals as shown in the following figures.
The intensity knob does not affect the digital channels.
Amplitude Modulation with Noise Shown at 100% Intensity
) to pan horizontally and turn the
InfiniiVision Oscilloscopes User's Guide
Advertisement
Table of Contents
