Table of Contents
Advertisement
To adjust waveform intensity
You can adjust the intensity of displayed waveforms to account for various
signal characteristics, such as fast time/div settings and low trigger rates.
Increasing the intensity lets you see the maximum amount of noise and
infrequently occurring events.
Reducing the intensity can expose more detail in complex signals as
shown in the following figures.
1 Press the [Intensity] key to illuminate it.
2 Turn the Entry knob to adjust the waveform intensity.
Waveform intensity adjustment affects analog channel waveforms only (not
math waveforms, reference waveforms, digital waveforms, etc.).
Agilent InfiniiVision 4000 X-Series Oscilloscopes
User's Guide
8
Display Settings
This key is located just below the Entry knob.
151
153
155
155
155
157
s1
156
151
Advertisement
Table of Contents
