Display Settings; To Adjust Waveform Intensity - Agilent Technologies 4000 X-Series User Manual

To adjust waveform intensity

You can adjust the intensity of displayed waveforms to account for various
signal characteristics, such as fast time/div settings and low trigger rates.
Increasing the intensity lets you see the maximum amount of noise and
infrequently occurring events.
Reducing the intensity can expose more detail in complex signals as
shown in the following figures.
1 Press the [Intensity] key to illuminate it.
2 Turn the Entry knob to adjust the waveform intensity.
Waveform intensity adjustment affects analog channel waveforms only (not
math waveforms, reference waveforms, digital waveforms, etc.).
Agilent InfiniiVision 4000 X-Series Oscilloscopes
User's Guide
8

Display Settings

To adjust waveform intensity
To set or clear persistence
To clear the display
To select the grid type
To adjust the grid intensity
To display waveforms as vectors or dots
To freeze the display
This key is located just below the Entry knob.
149
151
153
153
153
155
s1
154
149