InfiniiVision Oscilloscopes User's Guide
15 Press the WS Low softkey to select whether WS Low indicates Left or Right channel
data. The on-screen diagram changes with your selection.
WS Low = Left Channel: Left-channel data corresponds to WS=low; right-channel
data corresponds to WS=high. WS Low=Left is the oscilloscope's default WS setting.
WS Low = Right Channel: Right-channel data corresponds to WS=low; left-channel
data corresponds to WS=high.
16 Press the SCLK Slope softkey to select the SCLK edge on which data is clocked in
your device under test: either rising or falling. The on-screen diagram changes with
your selection.
17 Press the up arrow softkey.
18 Press the Trigger Setup softkey.
Trigger
Channel for
qualifier
triggering
19 Press the Audio softkey and rotate the Entry knob to choose to trigger on Left channel
events, Right channel events, or events that occur on Either channel.
Base
Data value
4
Triggering
Return to
previous menu
125