Using The Analog Channels - Agilent Technologies InfiniiVision 5000 Series User Manual

Using the Analog Channels

Channel 1
ground level
Channel 2
ground level
InfiniiVision Oscilloscopes User's Guide
4 Press the Preview softkey to preview the screen saver you have selected with the
Saver softkey.
5 To view the normal display after the screen saver has started, press any key or turn any
knob.
1 Connect the oscilloscope probes for channels 1 and 2 to the Probe Comp output on the
front panel of the instrument.
2 Press the [1] key in the Analog section of the oscilloscope's front panel to display the
Channel 1 Menu.
Channel,
Volts/div
Input
Channel
impedance
coupling
Bandwidth Fine V/div
limit adjustment
Initial Setup
Trigger Trigger level
source or threshold
Invert Probe
channel menu
2
59