Agilent Technologies InfiniiVision 5000 Series User Manual page 120

4
Triggering
N O T E
120
If don't care (0xXX) is selected for data, the data will be ignored. The trigger will
always occur on the 17th clock for 7-bit addressing or 26th clock for 10-bit
addressing.
c If you have selected a three-byte trigger, press the Data2 value softkey and turn the
Entry knob to select the 8-bit data pattern on which to trigger.
2
To display I C serial decode, see page 310.
InfiniiVision Oscilloscopes User's Guide