Agilent Technologies InfiniiVision 5000 Series User Manual page 382

13
Digital Channels
Bus values
can be
shown in
hex or
binary
382
The buses are shown at the bottom of the display.
Using cursors to read bus values
To read the digital bus value at any point using the cursors:
1 Turn on Cursors (by pressing the [Cursors] key on the front panel)
2 Press the cursor Mode softkey and change the mode to Hex or Binary.
3 Press the Source softkey and select Bus1 or Bus2.
InfiniiVision Oscilloscopes User's Guide