Agilent Technologies InfiniiVision 5000 Series User Manual page 82

4
Triggering
82
This chapter provides instructions for setting up triggers for various signal types. Setups
can be saved if desired (see
The easiest way to trigger on a waveform is to use AutoScale. Simply press the
[AutoScale] key and the oscilloscope will attempt to trigger on the waveform using a
simple Edge Trigger type. For AutoScale details see
Complex waveforms may require specific trigger setups as described in this chapter.
"Saving Oscilloscope Data"
InfiniiVision Oscilloscopes User's Guide
on page 247).
"AutoScale" on page 177.