I2S Trigger - Agilent Technologies InfiniiVision 5000 Series User Manual

2
I S Trigger
InfiniiVision Oscilloscopes User's Guide
The N5468A (Option SND) I²S trigger and serial decode option adds the ability to decode
serial data to 4-channel or 4+16 channel oscilloscopes. To control serial decode press the
[Acquire] key.
2
An I S (Inter-IC Sound or Integrated Interchip Sound) trigger setup consists of connecting
the oscilloscope to the serial clock, word select, and serial data lines and then triggering
on a data value.
1 Press [Save/Recall]&Default Setup.
2 Press the [Label] key to switch labels on.
3 Turn on any analog or digital channels that you will be using for the I
4 Press the [More] key in the Trigger section of the front panel. Rotate the Entry knob
2
until I S is displayed in the Trigger softkey.
5 Press the Settings softkey to display the I
Bus
Signals
configuration
menu
menu
2
S Trigger Menu.
Currently selected channel
2
I S trigger

I2S trigger

setup menu
4
Triggering
2
S signals.
Trigger level
or threshold
Return to
previous menu
121