Rear Panel Control And Connector Descriptions - Agilent Technologies InfiniiVision 5000 Series User Manual

Rear Panel Control and Connector Descriptions

InfiniiVision Oscilloscopes User's Guide
1. External Trigger Input
of this feature.
2. Trigger Output
See
3. 10 MHz Reference Connector
page 406.
4. Calibration Protect Switch
5. Digital Input Connector
models only).
6. XGA Video Output
monitor to this connector.
7. USB Host Port
This port functions identically to the USB host port on the front
panel. USB Host Port is used for saving data from the oscilloscope and loading software
updates. See also page
8. USB Device Port
This port is for connecting the oscilloscope to a host PC. You can
issue remote commands from a host PC to the oscilloscope via the USB device port. See
"Remote Programming with Agilent IO Libraries"
9. LAN Port You can communicate with the oscilloscope and use the Remote Front
Panel feature using the LAN port. See
Web Interface" on page 280.
10. Kensington Lock
instrument.
11. Power Connector
attach power connector from 0950-4866 power supply.
12. GPIB Connector
issue remote commands from a host computer and retrieve data from the oscilloscope.
See "Remote Programming with Agilent IO Libraries"
See "External Trigger Input"
"Trigger Output" on page 95.
See "Using the 10 MHz reference clock"
See "User Calibration"
Connect the digital probe cable to this connector (MSO
This video output is always active. You can connect an external
357.
"Web Interface"
This is where you can attach a Kensington lock for securing the
Attach the power cord here, or on 6000A Option BAT models
This port is for controlling the oscilloscope via GPIB. You can
Controls and Connectors
on page 92 for an explanation
on page 394.
on page 284.
on page 275 and "Accessing the
on page 284.
12
on
369