I 2 C Serial Decode - Agilent Technologies InfiniiVision 5000 Series User Manual

10
Serial Decode/Lister
2
I C Serial Decode
N O T E
N O T E
N O T E
306
Because of oscilloscope hardware resource limitations, you cannot decode I
LIN triggering is selected.
2
For I C triggering setup see
2
1 Select the I C serial decode mode:
a Press the [Acquire] key.
b Press the Serial Decode softkey.
Display Decode
decode mode
c In the Serial Decode Menu, press the Mode softkey.
d Use the Entry knob (or repeatedly press and release the Mode softkey) to select the
2
I C serial decode mode.
2
2 Specify the I C signals:
If you have already set up an I
have set the analog trigger level for each analog channel, you can continue on with
step 3.
2
Changing I C signals in the Serial Decode setup also changes them in the Trigger setup.
page 121.
Signal
setup menu
2
C trigger, the signals have already been specified, and you
InfiniiVision Oscilloscopes User's Guide
2
C data while
Display
Return to
decode in
previous menu
Lister