Printing The Oscilloscope's Display; Quick Print - Agilent Technologies InfiniiVision 5000 Series User Manual

7
Printing and Saving

Printing the Oscilloscope's Display

Quick Print

244
You can print the complete display, including the status line and softkeys, to a USB
printer.
The Print Configuration Menu is displayed when you press the [Print] key. The print
option softkeys and the Press to Print softkey are ghosted (not available) until a printer is
connected.
Choose Options:
printer Setup info,
Invert,
Form Feed,
landscape
On earlier oscilloscopes the [Print] key was labeled [Quick Print] and the oscilloscope
attempted to print or save as soon as the key was pressed.
On newer oscilloscopes the key is labeled [Print], and by default, when it is pressed the
Print Configuration Menu is displayed.
Now you can select whether pressing the key displays the Print Configuration Menu or
performs a Quick Print.
To choose Print or Quick Print functionality:
1 Press [Save/Recall].
2 Press the Quick Print softkey to set Quick Print on or off.
When Quick Print is enabled, a Save function is performed immediately when the [Print]
(or [Quick Print]) key is pressed. The save parameters must be set up in the Save/Recall
Menu (see page 247) before pressing [Print].
Select
Color or
Grayscale
InfiniiVision Oscilloscopes User's Guide
Prints the
waveform