Uart/Rs232 Serial Decode - Agilent Technologies InfiniiVision 5000 Series User Manual

UART/RS232 Serial Decode

N O T E
N O T E
InfiniiVision Oscilloscopes User's Guide
Because of oscilloscope hardware resource limitations, you cannot decode UART/RS232
data while CAN, LIN, or FlexRay triggering is selected.
For UART/RS232 triggering setup see
1 Select the UART/RS232 serial decode mode:
a Press the [Acquire] key.
b Press the Serial Decode softkey.
Display Decode
decode mode
c In the Serial Decode Menu, press the Mode softkey.
d Use the Entry knob (or repeatedly press and release the Mode softkey) to select the
UART/RS232 serial decode mode if it is not already selected.
page 166.
Signal Frame
setup menu counter
reset
Serial Decode/Lister
Display
Return to
decode in previous menu
Lister
10
329