Selecting A File Name - Agilent Technologies InfiniiVision 5000 Series User Manual

Selecting a File Name

InfiniiVision Oscilloscopes User's Guide
If one or more USB mass storage devices are connected to the oscilloscope, you can
navigate to the USB device using the same method. The following display image shows
an image ready to be saved to a subfolder called "Rise time" on a USB mass storage
device. Push the Entry knob to save the image.
Overwriting a file
You can choose to overwrite an existing file name by browsing to that file and selecting it,
then choosing Press to Save.
Creating a new file name
1 Press the File Name softkey in the Save Menu. (You must have a USB mass storage
device connected to the oscilloscope for this softkey to be active.)
2 Repeatedly turn and push the Entry knob to select letters and numbers for the new file
name. Or, you can press the Spell softkey and press the Enter softkey to create the
new file name.
3 You can press the Enter softkey or the Entry knob to move the cursor forward within
the file name.
Printing and Saving
249
7