10.1.4 Location Format
This selection sets the coordinate system to be shown on the LCD.
1. Press the MENU key to display the menu.
2. Press the ▲ / ▼ keys to select " SETUP ", then
SELECT
press the
3. Press the ▲ / ▼ keys to select " CONFIGURA-
TION ", then press the
4. Select " LOCATION FORMAT " with the ▲ / ▼
keys, then press the
5. Press the ▲ / ▼ keys to select the desired
coordinate system.
ENTER
6. Press the
level.
7. To exit this menu and return to radio operation press the
10.1.5 Time Offset
This selection sets the time offset from UTC (time GPS sends to radio).
Refer to section "6.6 CHANGING THE GPS TIME" for details.
10.1.6 Time Display
This selection selects the time area between the local time and the UTC
time.
Refer to section "6.7 CHANGING THE TIME LOCATION" for details.
10.1.7 Time Format
This selection selects the time format between the 12-hour system and the
24-hour system.
Refer to section "6.8 CHANGING THE TIME FORMAT" for details.
GX1300
soft key.
SELECT
soft key.
SELECT
soft key.
soft key to store the selected
BACK
SELECT
SETUP
DSC SETUP
CHANNEL SETUP
CONFIGURATION
BACK
SELECT
CONFIGURATION
DIMMER
CONTRAST
KEY BEEP
LOCATION FORMT
BACK
SELECT
LOCATION FORMAT
dd°mm.mmm
dd°mm.mm
dd°mm'SS"
BACK
ENTER
BACK
soft key.
Page 89