Configuration Setup; Dimmer Adjustment; Lamp - Standard Horizon HX870 Owner's Manual

13 CONFIGURATION SETUP

13.1 DIMMER ADJUSTMENT

This menu selection adjusts the backlight intensity.
1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select "CONFIGURATION" with the CH▼/
CH▲ key, then press the [SELECT] soft key.
4. Select "DIMMER" with the CH▼/CH▲ key,
then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired level ("5" is default). When "OFF" is
selected, the lamp is turned off.
6. Press the [ENTER] soft key to store the
selected level.
7. Press the CLR key to return to radio operation.

13.2 LAMP

This menu selection is used to setup the illumination time of the display and
keypad.
1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select "CONFIGURATION" with the CH▼/
CH▲ key, then press the [SELECT] soft key.
4. Select "LAMP" with the CH▼/CH▲ key, then
press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired time.
OFF:
3/5/10 Sec: Illuminates the display/keypad
CONTINUOUS: Illuminates the display/keypad continuously.
6. Press the [ENTER] soft key to store the selected setting.
7. Press the CLR key to return to radio operation.
Page 94
Disables the display/keypad
lamp illumination.
for the selected time when
you press any key (except the
PTT switch).
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
CONFIGURATION
GPS SETUP
DIMMER
CONFIGURATION
LAMP
CONTRAST
BACK
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
BACK SELECT
BACK
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
CONFIGURATION
GPS SETUP
DIMMER
CONFIGURATION
LAMP
CONTRAST
BACK
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
BACK SELECT
BACK
SETUP
SELECT
CONFIGURATION
DIMMER
5
ENTER
SETUP
SELECT
CONFIGRATION
LAMP
OFF
3sec
5sec
10sec
CONTINUOUS
SELECT
HX870