Lamp; Priority Channel - Standard Horizon HX851 Owner's Manual

8.4 LAMP

This menu selection is used to setup the illumination time of the display and
keypad. The default setting is "5 Seconds".
1. Press and hold the
2. Press the
Setup" menu with the
Setup Setup
Setup Setup
3. Press the
4. Press the
Continuous: Illuminates the display/keypad continu-
Continuous Continuous
Continuous Continuous
1 1 1 1 1 /2 2 2 2 2 /3 3 3 3 3 /4 4 4 4 4 /5 5 5 5 5 /6 6 6 6 6 /8 8 8 8 8 /10
Off Off
Off: Off Off
5. Press the
6. To exit this menu and return to radio operation mode press the
press the

8.5 PRIORITY CHANNEL

Allows selection of the priority channel when priority scan is enabled. The de-
fault setting is "Channel 16".
1. Press and hold the
2. Press the
dio Setup" menu with the
dio Setup dio Setup
dio Setup dio Setup
3. Press the
4. Press the
to be a priority.
5. Press the
6. To exit this menu and return to radio operation mode
press the
16/9
Page 66
key until "Setup Menu
key, then select "Lamp
/
key.
/ key to select the desired time.
ously.
10 10 10/12 10 12 12 12 12/15 15 15 15 15/20 20 20 20 20/25 25/30 Seconds 25 25 25
Illuminates the display/keypad for the se-
lected time when press any key (except
the PTT switch).
Disables the display/keypad lamp illumi-
nation.
key to store the selected setting.
key several times.
key until "Setup Menu
key, then select "Priority CH
key.
/ key to select the desired channel
key to store the selected setting.
key or press the
Setup Menu" appears.
Setup Menu Setup Menu
Setup Menu
Lamp" in the "Radio
Lamp Lamp Lamp
key.
30 Seconds 30 Seconds 30 Seconds: 30 Seconds
Setup Menu" appears.
Setup Menu Setup Menu
Setup Menu
Priority CH" in the "Ra-
Priority CH Priority CH Priority CH
/ key.
key several times.
Radio Radio Radio Radio
16/9
Ra- Ra- Ra- Ra-
key or
HX851