Setting the Calibration Display Level
You can set whether this equipment uses the calibration settings that are operated by a user or
administrator.
When you select the Admin mode for the Calibration Display Level, the [CALIBRATION] button under the
[USER] menu disappears. When you select the User mode for the Calibration Display Level, the
[CALIBRATION] button under the [ADMIN] menu disappears.
1
Press the [GENERAL] button.
- The GENERAL menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
Page 94
2
Press the [CALIBRATION DISPLAY
LEVEL] button.
- The CALIBRATION DISPLAY LEVEL screen is displayed.
3
Press the [ADMIN] button to enable the
administrator's calibration setting, or
[USER] button to enable the user's
calibration setting.
- The Calibration Display Level setting is completed.
4
107