imagistics cm4530 User Functions Manual page 113

4
Press the [PRINT] button.
5
Press the desired resolution button of the
emulation that will be based on the
calibration.
- Press the [600 x 600] button in the "PS3" menu to calibrate for the
600 dpi PostScript print job.
- Press the [1200 x 600] button in the "PS3" menu to calibrate for
the 1200 dpi PostScript print job.
- Press the [600 x 600] button in the "PCL" menu to calibrate based
on the 600 dpi PCL output image.
- Press the [1200 x 600] button in the "PCL" menu to calibrate
based on the 1200 dpi PCL output image.
The [1200 x 600] buttons are displayed only when additional
memory is installed on this equipment.
6
Press the [DEFAULT] button to set the
default calibration setting for selected job
type, or [CALIBRATION] button to adjust
the calibration setting for selected job
type.
- When you press the [DEFAULT] button, the system maintains the
default calibration setting for selected job type and returns to the
CALIBRATION menu. The calibration setting is completed.
- When you press the [CALIBRATION] button, the chart is printed
out and calibration guide illustration is displayed on the touch
panel.
4
111