Setting Scan Functions - imagistics cm4530 User Functions Manual

4. SETTING SCAN FUNCTIONS

You can change the initial setting (default setting) of scan job.
1
Press the [USER FUNCTIONS] button on
the control panel to enter the User
Functions menu.
2
Press the [USER] button, and then press
the [SCAN] button on the touch panel.
- The SCAN screen is displayed.
3
In the "COLOR MODE" option, press the
desired mode button.
4
In the "JPEG COMPRESS" option, press
the desired mode button.
5
In the "THRESHOLD" option, press the
light button or dark button to specify the
contrast.
- If you move to the left, the black and white in an original will be
scanned neutrally.
- If you move to the right, the black and white in an original will be
scanned distinctly.
When the Color mode is set to the Auto Color mode and the
equipment detects the originals as black originals, the equipment
uses the setting of the "THRESHOLD" option. This setting specifies
the contrast for scanning a black original in the Auto Color mode.
3
83