imagistics cm4530 User Functions Manual page 83

6
In the "TX TYPE" option, press the
desired mode button.
- [MEMORY TX] — Press this to set the Memory TX mode as
default transmission mode that will send after scanning and
saving all originals in the memory. This mode enables to multi-
address transmission.
- [DIRECT TX] — Press this to set the Direct TX mode as default
transmission mode that will send originals page by page after
every original has been scanned. This mode enable to single-
address transmission only.
The "TX TYPE" option is available only when the optional Fax unit
is installed.
7
Press the [Next] button to display the next
screen.
8
In the "TTI" option, specify whether the
TTI is enabled or disabled as default
setting.
- [ON] — Press this to print a transmission header (TTI) on
received faxes to clearly identify the sender name of received
faxes.
- [OFF] — Press this not to print a transmission header (TTI) on
received faxes.
- The "TTI" option is available only when the optional Fax unit is
installed.
- The "TTI" option is not displayed depending on the region.
9
In the "RTI" option, specify whether the
RTI is enabled or disabled as default
setting.
- [ON] — Press this to print a reception header (RTI) on received
faxes to clearly identify the time, date, and page count of received
faxes.
- [OFF] — Press this not to print a reception header (RTI) on
received faxes.
The "RTI" option is available only when the optional Fax unit is
installed.
3
81