Setting The Auto Power Save Mode - imagistics cm4530 User Functions Manual

Setting the Auto Power Save Mode

This function allows this equipment automatically to go into the energy saving mode (unnecessary
electricity is cut off at standby) if it is left inactive for a certain period of time.
1
Press the [GENERAL] button in the
ADMIN menu.
- The GENERAL menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
Page 94
2
Press the [ENERGY SAVER] button.
- The ENERGY SAVER menu is displayed.
3
Press the [AUTO POWER SAVE] button.
- The AUTO POWER SAVE screen is displayed.
4
Press the desired period of time (in
minutes) that this equipment waits before
the Automatic Power Save mode is
activated.
- The Auto Power Save mode setting is completed.
4
105