imagistics cm4530 User Functions Manual page 111

4
Press the [COPY] button.
5
Press the [DEFAULT] button to set the
default calibration setting, or
[CALIBRATION] button to adjust the
calibration setting.
- When you press the [DEFAULT] button, the system maintains the
default calibration setting and returns to the previous screen. The
calibration setting is completed.
- When you press the [CALIBRATION] button, the chart is printed
out and calibration guide illustration is displayed on the touch
panel.
6
Place the printed chart face down on the
glass with its bottom toward you and its
top left aligned against the original scale
on the left side, in order that the black line
be placed at the left side.
7
Press the [START] button.
- When the calibration setting is completed, the GENERAL menu
will be displayed.
If the chart is not properly placed, the message "Set chart correctly"
is displayed on the touch panel. In this case, go back to step 6 and
place the chart again.
4
109