Staple Sorting; Setting Staple Sort Mode - imagistics cm4530 Operator's Manual

Staple Sorting

When the finisher (optional) is installed, you can perform automatic stapling for every set. 3 staple positions
can be selected when installing the multi-staple finisher (9285).
* The paper weight should be in the range of 17-28 lb. for the multi-staple finisher (9285), and 17-20 lb.
Bond for the single-staple finisher (9284). Special paper such as OHP films or labels is excluded.
* Stapling will not work when copied paper of different widths are mixed.
- Example of selecting the [FRONT STAPLE-1] button

Setting Staple Sort Mode

1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER"
- When using this mode in bypass copying ("Bypass Copying"
Page 58), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS"
3
Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
Page 36
Page 45
AB
3
81