Define The Media Configuration Of The Océ Colorwave - Oce ColorWave 600 User Manual

Define the media configuration of the Océ ColorWave
Define the media configuration of the Océ ColorWave
Introduction
You must indicate in the Océ Express WebTools the following settings.
The core size of the media rolls
■
The folder value
■
The media series
■
How to define the core size of the media
Attention: Access the Océ Express WebTools. This setting is editable for the
Key operator and the Power user.
Navigate to 'Preferences' - 'System defaults' - 'Hardware configuration'.
1.
Click the value for 'Two-inch core used' to access the edit window and indicate if you
2.
also use 2 inch cores.
The standard roll core size for the Océ ColorWave
media rolls with 2 inch cores the Océ ColorWave
adjustments to also support these media.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
3.
How to define the folder value
Attention: Access the Océ Express WebTools. This setting is editable for the
Key Operator and the Power user.
Navigate to 'Preferences' - 'System defaults' - 'Hardware configuration'.
1.
Set the value to 'on' if a folder is connected to the external output at the rear side of
2.
the printer.
The default folder value is 'Off'. You must only change this value if your hardware
configuration changes.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
3.
188 Chapter 6 Manage media on the Océ ColorWave
™
600
™
600 is 3 inch. If you also use
™
600 must do some internal
™
600 printing system
™
600