Oce ColorWave 600 User Manual page 115

Configure the network settings on the printer operator panel
Step Action
8 The printer operator panel now displays the network
settings.
Record the IP address (for example,
134.188.26.173). You need this IP address to access
the 'Océ Express WebTools' later in order to
complete the printer configuration.
Use the 'Upper right softkey' to finish the network
installation procedure.
9 When you are ready and have left the wizard, the
system indicates if you have to restart the controller
of the Océ ColorWave
network settings. This can, for example, be the case
when settings are received through DHCP. When no
indication appears, you do not need to restart the
controller.
™
600 printer to apply the new
Illustration
[120]
[121]
115