Set The 'Rotation' Mode - Oce ColorWave 600 User Manual

Set the 'Rotation' mode

Introduction
The 'Rotation' setting allows you to rotate the image according to predefined rotation
values or you can let the printer perform the rotation automatically.
Choose one of the following values.
'No rotation'
■
'90°'
■
'180°'
■
'270°'
■
'Auto rotate portrait'
■
'Auto rotate landscape'
■
'Auto rotate portrait with additional 180° rotation'
■
'Auto rotate landscape with additional 180° rotation'
■
Auto rotate media saving
■
When to do
When you want to give preference to a productive print set-up and an efficient use of
media configure the system for Auto rotate media saving.
Before you begin
This setting is editable for the Key operator or Power user.
How to set the rotation mode
Click 'Preferences'- 'Print job defaults' - 'Image'.
1.
Click 'Edit' in the 'Image' bar or click the value of the 'Rotation' setting.
2.
Select the correct value.
3.
Select Auto rotate media saving if the print productivity is an important factor.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
4.
Result
The output will be printed with minimal waste of media. In most cases this means
that the output will be printed in landscape orientation, provided the output fits on
the media in this orientation.
Set the 'Rotation' mode
225