Oce ColorWave 600 User Manual page 52

Run the installation wizard from the printer operator panel
Step Action
8 Select one of the following options.
■
■
9 The following message is displayed:
'Auto network discovery in progress'
52 Chapter 3 Prepare the printing system for use and get started
'Auto detect'
Use the 'Scroll wheel' to select 'Auto detect' if the
system must automatically detect your network
settings. Confirm your entry with the
'Confirmation key' above the 'Scroll wheel'.
Use the 'Upper right softkey' to go to next step
and continue with step 9.
'Manual'
Use the 'Scroll wheel' to select 'Manual' if you
want to configure the network settings manually.
Confirm your entry with the 'Confirmation key'
above the 'Scroll wheel'.
Use the 'Upper right softkey' to go to the next
step. You must now first follow the procedure to
enter the network settings manually
the network settings manually on page 54
Remarks
[52]
Configure
[53]