Handle A Media Jam - Oce ColorWave 600 User Manual

Handle a media jam

Introduction
When a media jam occurs, one of the steps to solve the problem is to cut the jammed
media. The printer operator panel displays the following message.
[254]
How to cut the media
[83]
Step Action
1 Use your right hand to push
down the metal plate that
guides the media. Use your left
hand to cut the media from left
to right with the knife behind
the front cover.
2 Place the knife back into the
original position. Again, push
down the metal plate that
guides the media.
Remarks
[255]
Handle a media jam
213