Configure The Printer; The 'System Defaults' Tab In The Océ Express Webtools; Configure The Regional Settings Of The Océ Colorwave ™ 600 - Oce ColorWave 600 User Manual

Configure the regional settings of the Océ ColorWave

Configure the printer

The 'System defaults' tab in the Océ Express
WebTools
Configure the regional settings of the Océ ColorWave
Purpose
The regional settings are configured during the installation of your Océ ColorWave
600. If you want to change the initial configuration, you can do so in the 'Regional
settings'.
Define the following settings for the printer.
'First language' and 'Second language' of the printer operator panel
■
'Measurement unit'
■
'Date format'
■
'Time format'
■
'Current date and time'
■
Note: Every time you change the 'Measurement unit', the controller recalculates the
values from millimeter to inches and vice versa. If you reverse to the original value
of this setting a slight calculation difference can occur due to rounding differences.
How to define the regional settings
Select 'Preferences' - 'System defaults' - 'Regional settings'.
1.
Click a single value, for example the value selected for 'First language',
2.
or
Click 'Edit' in the 'Regional settings' bar to access a window for all regional settings.
3.
Modify the settings. You can choose between:
4.
settings that are commonly used in the USA
■
or settings that are commonly used in the rest of the world.
■
Click 'Ok' to:
5.
confirm you entries
■
or 'Cancel' to reject your entries.
■
102 Chapter 4 Configure the printing system
™
600
™
600
™