Calibrate the Océ ColorWave
Calibrate the Océ ColorWave
When to do
Note: Only roll position 1 can be used for calibrations.
Note: Use only Océ 'Media'
Note: The printer will do the calibration automatically. You do not need to keep this
printed calibration chart.
Evaluate the Customer Acceptance Test print. If the print shows any output quality
problems, you can use this calibration wizard to check if the Océ ColorWave
works properly.
The calibration will take a several minutes. The printed output is delivered at the rear
side of the printer and lead through the slot below the 'Top back cover'.
How to calibrate the Océ ColorWave
[118]
Step
Action
1
From the 'Home' screen on the printer operator panel
select the 'System' tab.
2
Select the 'Maintenance' tab with the upper left softkey.
274
Chapter 7 Print quality and Print productivity
™
600 printer
™
600 printer
™
600 printer
for reliable calibrations.
Remarks
[290]
[291]
™
600