Load A Media Roll - Oce ColorWave 600 User Manual

Load a media roll

How to load a media roll
Attention: Do not use dented media rolls to prevent damage to the imaging
devices.
Attention: Do not open the media drawer during the print process.
Attention: Do not open more than one media drawer at the same time to prevent
overbalance of the printer.
Attention: It is very important to select the media type with the correct media
code (for example LFM090). You can find the media code of the new media roll
on the sticker on media box. The media code represents a specific media profile
that the Océ ColorWave
corresponding media type. If the correct media code is not available on your
printer operator panel, you must first make a new media profile available on the
printer operator panel.
operator panel on page 139
Attention: When you unpack a media roll, always write the correct media name
and media code inside the core. In that case, if you replace a media roll before it
is empty and you want to re-use the media roll later, you will have the correct
media information available.
Caution: Watch your fingers when you handle the media roll.
[78]
™
600 uses to optimize the printed output for the
Make a new media profile available on the printer
Load a media roll
201