Oce ColorWave 600 User Manual page 273

[117]
[117] Nozzle dropout
Number
1
2
3
4
How to solve the problem
Check if the system compensates for the nozzle dropout during the next swath.
1.
If the system does not compensate for the nozzle dropout, you must print the
2.
Customer Acceptance Test.
Check the colored bars of the test print.
3.
Note: Either check the test print on the second half of the print or reprint the
Customer Acceptance Test and check the second print. When the colored bars are
OK, the system functions correctly. However, it is always advised to switch to a
higher print mode.
Select a higher print mode, even when you use the 'Océ Print Assistant'.
4.
Try to print on another media.
5.
If the colored bars of the Customer Acceptance Test demo print still show lines you
6.
must contact the Océ Helpdesk.
Thin horizontal, colored or white lines across your print
Nozzle dropout
Magenta
Cyan
Black
Yellow
273