Cover or drawer opened
Cover or drawer opened
Introduction
The media drawers and certain covers must only be opened if you are asked to do so
in a wizard on the printer operator panel.
Attention: When you open one of the indicated covers or drawers while you are
not in a wizard, the system produces a warning signal. The red LED on the
printer operator panel illuminates.
Attention: When you open one of these covers or drawers during printing, the
printer stops and the printer operator panel shows one of the warnings that are
listed in the table below. When you closed the indicated cover or drawer, the print
is cut and the print job is sent to printer again.
[57]
152
Chapter 5 Use the printing system