Ink Limit; Hpgl/2 Test File - ENCAD 215319-1 User Manual

Ink limit

The printer can assign an ink limit to polygon fills and wide vectors. This helps
prevent bleeding when printing on inexpensive inkjet media. The default for this
option is On. If you are using high quality media, this option may not be needed
and can be turned off.
To enable the ink limit
From the main menu, press Setup Menu/HPGL/2 menu/Ink Limit.
1
In the Ink Limit menu, choose On and press OK.
2

HPGL/2 Test File

To assist in diagnosing potential problems with your printer, we have placed an
HPGL/2 test file in the printers ROM memory. The colors that print on the test
file are the RGB values for those colors as defined in AutoCAD. Front Panel
settings for Ink Reduction and Ink Limiting have no effect on this file. All other
printer options such as Number of Passes and Carriage Speed are available.
To print the test file
From the main menu, press Utility Menu/Service Menu/Test Print.
1
®
CADJET 3D User Guide
HPGL/2 4-7